top

 
CHEMICAL HOSES
 
EPDM HOSE

CSM HOSE
FPM HOSE
FEP HOSE
INLINER HOSE
SOLVENT HOSE NBR 2
STEAM HOSE 164 and 210
LIQUID GAS HOSE with spiral
Chemical hoses (German)  

 

EPDM HOSE

Resistant against a large number of acids and alkaline solutions, aldehydes, amines, esters, ketones and other chemicals. Version with good bending characteristics. Conforms to DIN EN 12155 and TRbF 131, Part 2.

For information on temperature and media resistances please see our Simon resistances chart.

Construction:

  • Black, electrically conductive EPDM tube
  • Tension and pressure-resistant fabric inlays
  • Embedded copper wire
  • Optional: Concealed steel spiral
  • Weather-resistant, electrically conductive, abrasion-resistant CR cover
  • Interior smooth, exterior smooth fabric patterned or corrugated


ND
(mm)		 Wall thickness
(mm) 		WP
(bar) 		Vacuum
(bar) 		Bend. radius
approx. (mm)		 Max. length
(m)
19 6 10 0,5 125 40
19* 6 10 0,9 125 40
25 6 10 0,4 150 40
25* 6 10 0,9 150 40
32 6 10 0,4 175 40
32* 6 10 0,9 175 40
38 6,5 10 0,4 225 40
38* 6,5 10 0,9 225 40
50 8 10 0,3 275 40
50* 8 10 0,9 275 40
63 8 10 - 300 40
63* 8 10 0,9 300 40
75 8 10 - 350** 40
75* 8 10 0,8 350 40
100 8 10 - 450** 40
100* 8 10 0,8 450 40
125 9 10 - 575** 40
125* 9 10 0,8 575 40
150 10 10 - 700** 40
150* 10 10 0,8 700 40

*) Spiral hose version.
**) Applies only to operation at minimum 1 bar, otherwise risk of hose kinking.

Other versions and dimensions on request.

 

 

CSM HOSE

For a large number of concentrated acids, alkaline solutions, alcohols, saline solutions. Kink-resistant version with good bending properties. Conforms to DIN EN 12155 and TRbF 131, Part 2.

For information on temperature and media resistances please see our Simon resistances chart.

Construction:

  • Black, electrically conductive CSM tube
  • Tension and pressure-resistant fabric inlays
  • Embedded copper wire
  • Optional: Concealed steel spiral
  • Weather-resistant, electrically conductive, abrasion- resistant CR cover
  • Interior smooth, exterior smooth fabric patterned or corrugated


ND
(mm)		 Wall thickness
(mm) 		WP
(bar) 		Vacuum
(bar) 		Bend. radius
approx. (mm)		 Max. length
(m)
19 6 10 0,5 125 40
19* 6 10 0,9 125 40
25 6 10 0,4 150 40
25* 6 10 0,9 150 40
32 6 10 0,4 175 40
32* 6 10 0,9 175 40
38 6,5 10 0,4 225 40
38* 6,5 10 0,9 225 40
50 8 10 0,3 275 40
50* 8 10 0,9 275 40
63 8 10 - 300 40
63* 8 10 0,9 300 40
75 8 10 - 350** 40
75* 8 10 0,8 350 40
100 8 10 - 450** 40
150 10 10 - 650** 40
150* 10 10 0,8 650 40

*) Spiral hose version.
**) Applies only to operation at minimum 1 bar, otherwise risk of hose kinking.

Other versions and dimensions on request.

 

 

FPM HOSE

For chemicals and acids in high concentrations and at high operating temperatures to max. 220° C. Version with good bending properties. Conforms to DIN EN 12115 und TRbF 131, Part 2.

For information on temperature and media resistances please see our Simon resistances chart.

Construction:

  • Black, electrically conductive FPM tube
  • Tension and pressure-resistant fabric inlays
  • Embedded copper wire
  • Optional: Concealed steel spiral
  • Weather-resistant, electrically conductive, abrasion-resistant CR cover
  • Interior smooth, exterior smooth fabric patterned or corrugated


ND
(mm)		 Wall thickness
(mm) 		WP
(bar) 		Vacuum
(bar) 		Bend. radius
approx. (mm)		 Max. length
(m)
19 6 10 0,5 188 40
19* 6 10 0,9 188 40
25 6 10 0,4 225 40
25* 6 10 0,9 225 40
32 6 10 0,4 263 40
32* 6 10 0,9 263 40
38 6,5 10 0,4 338 40
38* 6,5 10 0,9 338 40
50 8 10 0,3 413 40
50* 8 10 0,9 413 40
63 8 10 - 450 40
63* 8 10 0,9 450 40
75 8 10 - 525** 40
75* 8 10 0,8 525 40
100 8 10 - 675** 40
100* 8 10 0,8 675 40
125 9 10 - 880** 40
125* 9 10 0,8 880 40
150 10 10 - 1050** 40
150* 13 10 0,8 1050 40

*) Spiral hose version.
**) Applies only to operation at minimum 1 bar, otherwise risk of hose kinking.

Other versions and dimensions on request.

 

 

FEP HOSE

Outstanding chemical resistance, suitable for all customary media. Non-pressure steam cleaning to 130°C / max. 30 min. Kink-resistant version with good bending properties. Conforms to DIN EN 12115 und TRbF 131, Part 2.

For information on temperature and media resistances please see our Simon resistances chart.

Construction:

  • Transparent FEP tube
  • Tension and pressure-resistant fabric inlays
  • Embedded copper wire
  • Optional: Concealed steel spiral
  • Weather-resistant, electrically conductive, abrasion-resistant CR cover
  • Interior smooth, exterior smooth fabric patterned or corrugated


ND
(mm)		 Wall thickness
(mm) 		WP
(bar) 		Vacuum
(bar) 		Bend. radius
approx. (mm)		 Max. length
(m)
19 6 10 0,5 188 40
19* 6 10 0,9 188 40
25 6 10 0,4 225 40
25* 6 10 0,9 225 40
32 6 10 0,4 263 40
32* 6 10 0,9 263 40
38 6,5 10 0,4 338 40
38* 6,5 10 0,9 338 40
50 8 10 0,3 413 40
50* 8 10 0,9 413 40
63 8 10 - 450 40
63* 8 10 0,9 450 40
75 8 10 - 525** 40
75* 8 10 0,8 525 40
100 8 10 - 675** 40
100* 8 10 0,8 675 40

*) Spiral hose version.
**) Applies only to operations at minimum 1 bar, otherwise risk of hose kinking.


Other versions and dimensions on request.

 

 

INLINER HOSE

Outstanding chemical resistance through use of inliners of modern materials such as UPE, PE or PTFE. Conforms to DIN EN 12115 und TRbF 131, Part 2.

For information on temperature and media resistances please see our Simon resistances chart.

Construction:

  • UPE, PE or PTFE tube
  • Tension and pressure-resistant fabric inlays
  • Embedded copper wire
  • Optional: Concealed steel spiral
  • Weather-resistant, electrically conductive, abrasion-resistant CR cover
  • Interior smooth, exterior smooth fabric patterned or corrugated


ND
(mm)		 Wall thickness
(mm) 		WP
(bar) 		Vacuum
(bar) 		Bend. radius
approx. (mm)		 Max. length
(m)
19 6 10 0,5 188 40
19* 6 10 0,9 188 40
25 6 10 0,4 225 40
25* 6 10 0,9 225 40
32 6 10 0,4 263 40
32* 6 10 0,9 263 40
38 6,5 10 0,4 338 40
38* 6,5 10 0,9 338 40
50 8 10 0,3 413 40
50* 8 10 0,9 413 40
63 8 10 - 450 40
63* 8 10 0,9 450 40
75 8 10 - 525** 40
75* 8 10 0,8 525 40
100 8 10 - 675** 40
100* 8 10 0,8 675 40

*) Spiral hose version.
**) Applies only to operations at minimum 1 bar, otherwise risk of hose kinking.

Other versions and dimensions on request.

 

 

SOLVENT HOSE NBR 2

For a large number of solvents and mineral oil products, aldehydes, ketones, esters and alcohols. Conforms to DIN EN 12115 und TRbF 131, Part 2.

For information on temperature and media resistances please see our Simon resistances chart.

Construction:

  • Black, electrically conductive NBR tube
  • Tension and pressure-resistant fabric inlays
  • Embedded copper wire
  • Optional: Concealed steel spiral
  • Weather-resistant, electrically conductive, abrasion-resistant CR cover
  • Interior smooth, exterior smooth fabric patterned or corrugated


ND
(mm)		 Wall thickness
(mm) 		WP
(bar) 		Vacuum
(bar) 		Bend. radius
approx. (mm)		 Max. length
(m)
19 6 10 0,5 125 40
19* 6 10 0,9 125 40
25 6 10 0,4 150 40
25* 6 10 0,9 150 40
32 6 10 0,4 175 40
32* 6 10 0,9 175 40
38 6,5 10 0,4 225 40
38* 6,5 10 0,9 225 40
50 8 10 0,3 275 40
50* 8 10 0,9 275 40
63 8 10 - 300 40
63* 8 10 0,9 300 40
75 8 10 - 350** 40
75* 8 10 0,8 350 40
100 8 10 - 450** 40
100* 8 10 0,8 450 40
150 10 10 - 650** 40
150* 10 10 0,8 650 40

*) Spiral hose version.
**) Applies only to operations at minimum 1 bar, otherwise risk of hose kinking.

Other versions and dimensions on request.

 

 

STEAM HOSE 164 and 210

For use with saturated steam and hot water up to 90°C. Suitable for cleaning purposes. Steam hose 164 (+164°C / 6 bar WP) or steam hose 210 (+210°C / 18 bar WP) with 10 times bursting pressure safety. Also suitable for cleaning operations. Conforms to DIN 2825.

Construction:

  • Black, electrically conductive EPDM tube
  • Tension and pressure-resistant reinforcement inlays

    STEAM HOSE 164: Wrapped fabric inlays
    STEAM HOSE 210: Wrapped steel inlays

  • Weather-resistant, electrically conductive, abrasion-resistant EPDM cover
  • Interior smooth, exterior smooth fabric patterned


ND/I Ø
(mm)		 Wall thickness
(mm) 		WP
(bar)
Version:
164 and 210		 Bend. radius
approx. (mm)		 Max. length
(m)
15/13* 6 6 18 130 40
20/19* 7 6 18 190 40
25/25* 7,5 6 18 250 40
32/32* 8 6 18 320 40
40/40* 8 6 18 380 40
50/50* 9 6 18 500 40
75/75 optional 6 18 750 40
100/100 optional 6 18 1000 40
125/125 optional 6 - 1250 40
150/150 optional 6 - 1500 40

*) Versions conforming to DIN 2825.

Versions with embedded steel wire on request.

Other versions and dimensions on request.

 

 

LIQUID GAS HOSE with spiral

Liquid gas hose per EN 1762 (LPG), however with embedded spiral for smallest bending radiuses and very easy handling. For propane, butane and other liquid gasses per DIN 51622. Also suitable to transport gaseous media.

For information on temperature and media resistances please see our Simon resistances chart.

Construction:

  • Black, electrically conductive special tube
  • Tension and pressure-resistant fabric inlays
  • Embedded copper wire
  • Concealed steel spiral
  • Pin-pricked, weather-resistant, electrically conductive, abrasion-resistant cover
  • Interior smooth, exterior smooth fabric patterned


ND
(mm)		 Wall thickness
(mm) 		WP
(bar) 		Vacuum
(bar) 		Bend. radius
approx. (mm)		 Max. length
(m)
13 5 25 0,8 80 40
16 5 25 0,8 90 40
19 6 25 0,8 100 40
25 6,5 25 0,8 150 40
32 6,5 25 0,8 200 40
38 7 25 0,8 280 40
50 8 25 0,8 350 40
63 9 25 0,8 480 40
75 9 25 0,8 550 40
80 9 25 0,8 680 40
100 10 25 0,8 720 40

Supplied by the roll or cut to length.
Available as drum-windable or simple loading or drainage hose, also without spiral.

Other versions and dimensions on request.