top

 
OIL AND FUEL HOSES
 
OIL HOSE

TANK TRUCK HOSE
REEL HOSE
DOCK HOSE
BITUMEN HOSE
TANK ROOF DRAINAGE HOSE
Oil and fuel hoses (German)  

 

OIL HOSE

For all types of mineral oil products, especially technical oils and lubricants, petrol and benzole mixtures 50 : 50, leaded and unleaded fuels with an aromatic content up to 50%, diesel fuels, heating oils, hydraulic oils based on mineral oil. Barrel-polishable, vacuum-constant finish. Temperature resistant from -35°C to +90°C. Conforms to DIN EN 12115 and TRbF 131, Part 2.

Construction:

  • Oil & petrol-resistant, conductive NBR tube
  • Tension and pressure resistant fabric inlays
  • Embedded copper wire
  • Weather-resistant, abrasion-resistant, conductive CR cover
  • Interior smooth, exterior smooth fabric patterned


ND
(mm)		 Wall thickness
(mm) 		WP
(bar) 		Vacuum
(bar) 		Bend. radius
approx. (mm)		 Max. length
(m)
19 6 25 0.6 125 40
25 6 25 0.5 150 40
32 6 25 0.3 175 40
35 6 25 0.3 200 40
38 6.5 25 0.3 225 40
40 7 25 0.3 240 40
45 7 25 0.3 265 40
50 8 25 0.3 275 40
63 8 25 - 300 40
75 8 20 - 350 40
100 8 16 - 450 40

Supplied by the roll or cut to length
Also available as spiral hose.

Other versions and dimensions on request.

 

 

TANK TRUCK HOSE

For all types of mineral oil products, especially technical oils and lubricants, petrol and benzole mixtures 50 : 50, leaded and unleaded fuels with an aromatic content up to 50%, diesel fuels, heating oils based on mineral oil. Highly flexible and robust finish. Temperature resistant from -35°C to +90°C. Conforms to DIN EN 12115 und TRbF 131, Part 2.

Construction:

  • Oil and petrol-resistant, conductive NBR tube
  • Tension and pressure-resistant fabric inlays
  • Concealed steel spiral
  • Optional: Embedded copper wire
  • Weather-resistant, abrasion-resistant, conductive CR cover
  • Interior smooth, exterior smooth fabric patterned


ND
(mm)		 Wall thickness
(mm) 		WP
(bar) 		Vacuum
(bar) 		Bend. radius
approx. (mm)		 Max. length
(m)
25 6 20 0.9 150 40
32 6 20 0.9 175 40
38 6.5 20 0.9 225 40
40 7 20 0.9 240 40
50 8 20 0.9 275 40
63 8 16 0.9 300 40
75 8 16 0.8 350 40
80 8 16 0.8 400 40
100 8 16 0.8 450 40
125 10 16 0.8 570 20
150 11 16 0.8 750 30

Supplied on rolls or cut to length.

Other versions and dimensions on request.

 

 

REEL HOSE

Flexible pressure hose for petrol and benzole mixtures 50 : 50, leaded and unleaded fuels with aromatic content up to 50% Diesel fuels, heating oils, mineral oil-based hydraulic oils. Barrel-polishable hose with very narrow bending radiuses and easy handling. Temperature resistant from -35°C to +90°C. Conforms to DIN EN 12115 und TRbF 131, Part 2.

Construction:

  • Oil and petrol-resistant, conductive NBR tube
  • Tension and pressure-resistant fabric inlays
  • Embedded copper wire
  • Weather-resistant, abrasion-resistant, conductive CR cover
  • Interior smooth, exterior fabric patterned


ND
(mm)		 Wall thickness
(mm) 		WP
(bar) 		Vacuum
(bar) 		Bend. radius
approx. (mm)		 Max. length
(m)
25 6 20 - 150 40
32 6 20 - 175 40
38 6.5 20 - 225 40
40 7 20 - 250 40
50 8 20 - 275 40
50* 9 15 - 300 40

*) Version as tank cleaning hose. Resistant to all customary cleaning agents.
Supplied by the roll or cut to length.

Other versions and dimensions on request.

 

 

DOCK HOSE

Delivery hose for crude oil, lubricating oil, diesel oil, petrol and other fuels up to an aromatic content of 50%. Steam cleaning max. 120°C / max. 60 min. Wide range of applications. Kink and abrasion resistant due to vulcanized hose fittings. With 3 or 4 times burst pressure safety. Temperature resistant from -35°C to +110°C. Slight elongation at full load.

Construction:

  • Oil and petrol-resistant, conductive NBR tube
  • Tension and pressure-resistant fabric inlays
  • Embedded copper wire
  • Concealed steel spiral
  • weather-resistant, abrasion-resistant, conductive CR cover
  • Interior smooth, exterior fabric patterned


ND
(mm)		 Wall thickness
(mm) 		WP
(bar) 		Vacuum
(bar) 		Bend. radius
approx. (mm)		 Max. length
(m)
100 11.5 16 0.8 600 40
150 12.5 16 0.8 700 30
200 12.5 16 0.8 800 10
250 13.5 16 0.8 1000 10
300 18 16 0.8 1200 10

Depending on the application and customer needs, dock hoses are supplied with built-in flanges. Flange dimensions per DIN, ANSI (ASA) or as special bore.

Other versions conforming to EN 1765, BS 1435:1987 or other standards and pressure stages on request.

Other versions and dimensions on request.

 

 

BITUMEN HOSE

For hot bitumen or tar at temperatures from -25°C to +220°C. With additional spiral for maximum safety and highest possible flexibility.

Please observe the safety regulations for bitumen hoses.

Construction:

  • Special NBR tube in black
  • Tension and pressure-resistant fabric inlays
  • Embedded copper wire
  • Concealed steel spiral
  • Black, abrasion-resistant CR cover
  • Interior smooth, exterior fabric patterned


ND
(mm)		 Wall thickness
(mm) 		WP
(bar)
at +20°C to +220°C		 Bend. radius
approx. (mm)		 Max. length
(m)
19* 6 10 10 100 40
25* 7 10 10 125 40
50 8 16 6 175 40
63 8 16 6 200 40
75 8 16 6 300 40
100 8,5 10 6 400 40

*) Tar spraying version.

Sold by the roll or cut to length with cuffed ends and/or widened hose endings.
Also available as heatable version or per DIN EN 13482.

Other versions and dimensions on request.

 

 

TANK ROOF DRAINAGE HOSE

For refinery tank roof drainage. Highly stable cross-section construction, also suitable for pressure tanks. Temperature resistant from -35°C to +80°C. Conforms to TRbF 131, Part 2.

Construction:

  • Special tube in black
  • Tension and pressure-resistant fabric inlays
  • Concealed steel spiral
  • Cover in special elastomers depending on tank medium
  • Interior smooth, exterior fabric patterned


ND
(mm)		 Wall thickness
(mm) 		Working pressure
approx. (bar)		 Max. length
(m)
50 9 16 36* 40
75 10 16 36* 40
100 12 16 36* 40
150 15 16 36* 30

*) Special version

Supplied by the roll or cut to length.

Other versions and dimensions on request.